RO Pure Water Equipment 1-30T/H Multiple filtered Water Production
一.Description
The reverse osmosis pure water equipment separates the ions,
organic matter and fine suspended matter (bacteria and colloidal
particles) in the water through the membrane tube to achieve the
purpose of desalting and purification of the water.
二.Principle
The principle is that water is separated from the solution by a
permeable membrane, and water permeates into the solution, and
there is osmotic pressure between the two phases. If the pressure
on the solution phase is greater than the osmotic pressure, then
the water in the solution phase will penetrate into the water
phase, which is called reverse osmosis. Dessalt water is obtained
by reverse osmosis, that is, raw water becomes pure water through
the permeable membrane under sufficient pressure, and the
concentration of dissolved water and suspended matter that does not
pass through the membrane gradually increases.
三.Technical parameter
1.Pure water equipment includes reverse osmosis and ion exchange
mixing bed (resin absorption order) part. According to the function
and function of each equipment in the system, it can be divided
into three parts: prefiltration dosing part, reverse osmosis
desalination part, and refined part of ion exchange mixing bed.
2.Equipment Parameter:
Water source: tap water (or groundwater), the total salt content of
water (TDS) should be less than 1500ppm, conductivity ≤200us / cm.
| 1 | Pure water production | 1-30T/h |
| 2 | Water Iinlet PH value | 6.5-7.5 |
| 3 | Maximum water inlet temperature | 35℃ |
| 4 | Water blockage index | SDI <5 |
3.Process Folw:
raw water→raw water booster pump→sand filter→carbon filter→5
precision filter→reverse osmosis machine→intermediate water
tank→intermediate water pump→mixed ion exchange
4.Reverse osmosis desalination parameters:
| 1 | Reverse osmosis desalination rate | 96%-98% |
| 2 | Raw water utilization | 65-75% |
