Powerful RO Pure Water Equipment Treatment Industrial RO Water
Machine
Product Description
1. Reverse osmosis pure water equipment separates ions, organic
matter, and fine suspended solids (bacteria and colloidal
particles) in water through membrane tubes, achieving the purpose
of water desalination and purification.
2. The principle is that water is separated from the solution
through a permeable membrane, and water permeates into the
solution, creating an osmotic pressure between the two phases. If
the pressure of the solution phase is greater than the osmotic
pressure, the water in the solution phase will permeate into the
water phase, which is called reverse osmosis. Desalinated water is
obtained through reverse osmosis, where raw water is transformed
into pure water through a permeable membrane under sufficient
pressure, and the concentration of dissolved water and suspended
solids that do not pass through the membrane gradually increases.
3. The pure water equipment includes a mixed bed of reverse osmosis
and ion exchange (resin adsorption sequence). According to the
functions and roles of each device in the system, it can be divided
into three parts: pre filtration and dosing part, reverse osmosis
desalination part, and ion exchange mixed bed refining part.
Technical Parameter
1. Pure water production: 1-30T/h;
2. Water source: tap water (or groundwater), the total salt content
of water (TDS) should be less than 1500ppm, conductivity ≤200us /
cm.
3. Water Iinlet PH value: 6.5-7.5
4. Maximum water inlet temperature: 35℃:
5. Water inlet PH value: 6.5-7.5;
6. Water blockage index; SDI <5
Process Folw
raw water→raw water booster pump→sand filter→carbon filter→5
precision filter→reverse osmosis machine→intermediate water
tank→intermediate water pump→mixed ion exchange
Reverse osmosis desalination parameters
1.Reverse osmosis desalination rate: 96%-98%；
2.Raw water utilization: 65-75%
Transportation&Packaging
